Galvanised Steel Downpipe Fixing Options

Screws, Pins or a Drive-in Spike

The Infinity Galvanised Steel rainwater range offers you a variety of methods for fixing the downpipe to the wall. There will be one to suit your property construction.

Downpipe Bracket

Our standard galvanised Steel downpipe clip or bracket available in plain galvanised and 5 other colours (Black, Anthracite Grey, Dusty Grey, White and Sepia Brown (shown below)) and 2 sizes 80mm & 100mm fixes the downpipe with 2 screws 25mm from the wall.
Any slight variance can be accommodated with the use of wooden bobbins that can easily be cut down to a couple of mm if required.

Standard Sepia Brown Downpipe Bracket

Standard Sepia Brown Downpipe Bracket

Wooden Bobbin - can easily be cut to whatever depth is required

Wooden Bobbin - can easily be cut to whatever depth is required

Standard downpipe bracket in situ on case study

Standard downpipe bracket in situ on case study

Downpipe Bracket with M10 Boss: GST_M10

Rainclear have also taken into stock, for next day delivery, a downpipe clip/bracket with an M10 Boss (socket) and 3 lengths of M10 Screw to accommodate a considerably greater variance in the surface or façade of the wall the downpipe is being fixed to.

 

Downpipe Bracket with M10 Boss - to screw M10 Screw into

Downpipe Bracket with M10 Boss - to screw M10 Screw into

 

 

N.B you need to buy the M10 Screws separately - they come in 3 depths

N.B you need to buy the M10 Screws separately - they come in 3 depths

 
The M10 Screws come in 3 different lengths

The M10 Screws come in 3 different lengths

 

 
N.B. the 60mm depth that goes into the wall is the same on all three ( and you can use a regular wall plug illustrated) - the rest of the screw depth varies to allow for variance in the wall surface/ façade the downpipe is being attached to

N.B. the 60mm depth that goes into the wall is the same on all three ( and you can use a regular wall plug illustrated) - the rest of the screw depth varies to allow for variance in the wall surface/ façade the downpipe is being attached to

 

Self tapping ‘Pin’ Screw and Cap

Not held in stock but available from our manufacturers should your project require it, is the self tapping ‘Pin’ Screw and Cap with M10 threaded tip to attach it to the downpipe bracket with M10 Boss (socket) – available in 300mm, 250mm, 200mm, 140mm and 80mm lengths.

Plus the long-shaft wall plug/or dowel for the pin screw - for fastening through insulating layers -available in 280mm, 240mm and 180mm.

If you are interested in this product for your project ask what lead times may apply.

 
Self tapping ‘Pin’ Screw and Cap

Self tapping ‘Pin’ Screw and Cap

We obviously consider all these options a more secure and robust fixing than just driving a spike into a pilot hole with a hammer.

“a good strong solution”

How one of our customers describes the M10 boss and screw bracket solution in a discussion on the Green Building Forum. He also says

“I used resin to embed the threaded part of the fixing… The stone here in my universe is mudstone and very hard but with a good sds drill I can put a hole into it with no problem”

Download the PDF Pricelist

 

Browse & Buy the Galvanised Steel range from Rainclear