Ratchet Spanner: A requirement for Rise and Fall Brackets?

Ratchet Spanner: A requirement for Rise and Fall Brackets?

Ratchet Spanner & Cast Aluminium Rise and Fall Brackets montage

Some ‘Rise and Fall’ Brackets examples insitu:

An example of Cast Iron Rise & Fall Brackets on a Manor House in Box, Wiltshire

An example of Cast Iron Rise & Fall Brackets on a Manor House in Box, Wiltshire

Rachet Spanner and Cast Iron Rise & Fall Brackets

Rachet Spanner and Cast Iron Rise & Fall Brackets

 

An example of Cast Aluminium Rise & Fall Brackets on a Farm House in Wiltshire

An example of Cast Aluminium Rise & Fall Brackets on a Farm House in Wiltshire

The manufacturers of our Rise and Fall brackets cut the threaded rod to size from 3mtr sections, weld it to the formed steel cup, and we then have the part zinc plated. There is a possibility that a concentration of zinc (The zinc plating can vary between 8-16 microns) in one area on the thread might sometimes cause the nut to become tight - or the thread might easily get knocked about and slightly damaged in transit or on site.

We asked around our regular customers who told us that they use a ratchet spanner when fitting these Rise and Fall brackets, so that they don’t lose any time when fitting – just in case the bolts do occasionally not ‘thread’ that well by hand.

Examples of Rachet Spanners

Examples of Rachet Spanners

We can arrange fabrication of bespoke solutions for you to meet your conservation or renovation project’s requirements.

Some examples of Bespoke Rise and Fall Brackets from the past:

Another example of a bespoke Rise & Fall bracket Rainclear arranged fabrication of for a customer

Another example of a bespoke Rise & Fall bracket Rainclear arranged fabrication of for a customer

An example of a bespoke Rise & Fall bracket Rainclear arranged fabrication of for a customer

An example of a bespoke Rise & Fall bracket Rainclear arranged fabrication of for a customer

Browse & Buy Cast Aluminium Drive in Rise and Fall Brackets in 3 profiles
 Half Round Cast Aluminium Rise & Fall Gutter Bracket - Textured Black

Half Round Cast Aluminium Rise & Fall Gutter Bracket - Textured Black

Victorian Ogee Cast Aluminium Rise & Fall Gutter Bracket - Textured Black

Victorian Ogee Cast Aluminium Rise & Fall Gutter Bracket - Textured Black

125x100 (5

125x100 (5"x 4") Moulded Ogee Aluminium Rise & Fall Bracket - Textured Black

Spikes are 330mm long as standard. We can supply 400mm as a special from stock and other lengths could be made to by special request. Threaded bars are 120mm long.

Browse & Buy Cast Iron Rise and Fall Brackets in 5 profiles

Spikes are 330mm long as standard. We can supply 400mm as a special from stock and other lengths could be made to by special request. Threaded bars are 120mm long.
(A zinc plated black coated steel half round cup fixed to a threaded bar which is able to be adjusted up or down in height, the cup and bar fit into a spike which is driven or fixed into existing or new brickwork.
Pre-Painted Black (cup and spike are pre-painted only – the threaded bar remains unpainted so you can set the ‘nut’(s) to the correct level insitu, and then paint (if required) after that) - ready to install
Or
A zinc plated steel half round cup fixed to a threaded bar. For on-site painting

Browse & Buy SnapIT Express Rise & Fall Brackets
Browse & Buy Galvanised Steel Rise & Fall Brackets


Available in uncoated Galv for onsite spray painting.
Spikes are 300mm as standard (We have never been asked for bespoke, but we could organise if required). Threaded bars 130mm long.

 

Call 0800 644 44 26 or email sales@rainclear.co.uk for help with your bespoke rise and fall bracket requirement.

Featured Posts

Categories